RMI-25 Cooling System Treatment
RMI-25 Cooling System Treatment
Radiator & Cooling System Treatment
RMI-25 Cooling System Treatment provides superior cooling compared to traditional glycol based, and waterless coolants at a much lower cost.
If you don’t need antifreeze, you don’t need glycol.
✓ Engines run cooler ✓ Provides outstanding cleaning ability ✓ Lubricates water pump seals and heater valves ✓ Guards against corrosion and electrolysis |
✓ Can be used with water alone or conventional coolants ✓ Non-toxic and biodegradable ✓ Doubles hose life ✓ Low cost concentrated formula |
More Information
More Information
RMI-25 Cooling System Treatment
RMI-25 is a concentrated additive designed to clean, lubricate and protect your radiator.
Why spend money on replacing expensive glycol when RMI-25 will clean and cool your entire cooling system while you drive.
RMI-25 makes engines run cooler, prolonging engine life.
One Easy Application – Just pour some in your radiator and drive away.
✓ Non-Toxic System Cleaner ✓ Total radiator & system Flush ✓ Glycol alternative ✓ Corrosion Protection ✓ Inhibits electrolysis | ✓ Avoids Water Pump failures ✓ Doubles Hose Life ✓ Prevents cavitation & pitting ✓ Contains Fluorescent leak detector |
RMI-25 cleans (and keeps clean) the cooling system while at the same time prevents corrosion, cavitation erosion and cylinder pitting. It lubricates water pump seals, heater control valves, drain plugs and virtually eliminates water pump failures, while preserving hoses, O-rings and seals.
Unlike other cooling system treatments, RMI-25 is non-toxic and biodegradable, it is entirely safe to use in environmentally sensitive areas.
Most products cannot prevent scale build up on cooling systems surfaces, which therefore require caustic or acid bathing.
RMI-25 breaks down solids to molecular size holding them in suspension this discolours the cooling water to darkish brown.
This colour change can occur within 6-10 hours of operation.
When this happens, simply drain system, back flush and re-dose until cooling water retains yellow-green colour.
At this point, the system is perfectly clean and will remain so if dosed accordingly.
RMI-25 Cooling System treatment can be added to all glycol based coolants or just used with water. Where anti-freeze is required, it should also be added. It is both a cleaner/de-scaler of the entire cooling system, as well as providing complete protection to all types of system materials.
Even a thin layer of mineral scale through the radiator and engine water jackets is a major barrier to efficient cooling! RMI-25 added to the coolant quickly dissolves mineral scale and sediment from conventional-type coolants.
Water provides more efficient cooling than the common glycol-type coolants, which are not necessary under typical Australian conditions. (Waterless coolants are generally pure glycol, and your engine will run hotter!).
Instructions For Use
Instructions For Use
RMI-25 can be added directly into the radiator at the following dosage rates
1:80 (250ml treats 20 Litres).
Frequently Asked Questions
Frequently Asked Questions
Does RMI-25 have any advantages over glycol type coolants?
Yes, RMI-25 is highly concentrated and much cheaper than glycol based coolants. Unlike glycol it is non-toxic and environmentally safe.
What does RMI-25 Radiator Flush do?
RMI-25 is a highly concentrated radiator additive designed to clean and protect your radiator. The RMI-25 dissolves rust and scale while lubricating the water pump.
When using RMI-25 do I need to refill with coolant/glycol?
No, RMI-25 is a complete cooling system package. Most Australian vehicles do not need anti-freeze, but where it is required, add some glycol to the system as well.
Safety Data Sheet Download
Safety Data Sheet Download
My temperature gauge is definitely not as high as it was since I added this product to my radiator.
Great product. I flushed the radiator and engine with it, and then added it to the water as this can be used in lieu of glycol/coolant.